UltraCut contains a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal hazing. Combine it with the CARPRO cutting pads (wool, flash, cool) or microfibres for extremely effective and efficient defect removal. Drop down to CARPRO orange polishing pad and you can finish down hologram-free even on the most sensitive paints.

UltraCut is a perfect solution for rotary or DA polishing with extremely low dusting and a lubricant that allows the abrasives to be fully worked over extended periods. This allows total breakdown with less marring and holograms.

KEY FEATURES

Extreme Cutting Action

Extremely Low Dust

Suitable on ALL Paint Finishes

Suitable for Dual Action and Rotary

INSTRUCTIONS:

D/A

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
2. Spread product across a section.
3. Raise speed to HIGH (4-5).
4. Use MIN pressure for first 2-3 passes and increase with each pass.
5. Blow air on pads often.
6. When scratches disappear or the polish has become clear, wipe clean with a MF towel.
7. Clean pad.
8. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.

Rotary

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of UltraCut.
2. Spread product across a section.
3. Keep polisher on LOW speed (1000-1200 RPM).
4. Use MIN pressure for first 2-3 passes and increase with each pass up to MAX.
5. Finish with LOW pressure.
6. When scratches disappear or the polish has become clear, wipe clean with a MF towel.
7. Clean pad.
8. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.